hua愛美食
（1）下列關于寬帶城域網技術的描述中，錯誤的是 A）寬帶城域網保證Qos的主要技術有RSVP、Diff-Serv和MPLS B）寬帶城域網帶內網絡管理是指利用網絡管理協議SNMP建立網絡管理系統 C）寬帶城域網能夠?yàn)橛脩籼峁挶ＷC，實現流量工程 D）寬帶城域網可以利用NAT技術解決IP地址資源不足的問題 （2）下列關于接入技術特征的描述中，錯誤的是 A）遠距離無線寬帶接入網采用標準 B）Cable Modem利用頻分利用的方法，將信道分為上行信道和下行信道 C）光纖傳輸系統的中繼距離可達100km以上 D）ADSL技術具有非對稱帶寬特征,1,100分懸賞 DELL工程師考試題目 just replaced the system board on studio 1737 for a NO-power powering up the system,you notice that the system gives an ON-FLASHING-ON LED is the first step to be performed to resolve this issus? A: Reseat the keyboard cable B: Reseat the processor C: Reseat the momory modules D: Reseat the LCD cable results indicate a failure with the Dell edgetouch hardware in the latitude Z600. Which of the following ponents shoulc be replaced? A: LCD panel B: system board C: edgetouch control panel D: LCD BEZEL a Studio 1745/1747/1749 shipped with an internal TV Tyber card,what is the additional associated internal ponent? A: External TV Tuner antenna B: All the options are correct C: internal TV tuner cable assembly D: TV remote the replacement of a system board for the Vostro A860, system is still not able to post with the status lights shown as On/Flashing/On. Which status light is to be referred to and what does it mean? A: Refer to device status lights and it means faulty ram detected. B: Refer to keyboard status lights and it means faulty memory detected C: Refer to keyboard status lights and it means no ram detected. D: Refer to device status lights and it means no ram detected. part should be replaced next if the latitude E4200 system board has been replaced and the "flash-on-on" LED code is still displayed? A: RAM B: Solod state drive C: lcd D: processor items must be removed from the precision M6500 before the internal Memory can be removed from the system board? choose all that apply A: keyboard B: Hinge cover C: battery D: palm rest 最后一題多選
俺是陸軍PLA
題庫00914、如何按技術性質來判定水泥為合格品,不合格品和廢品?（6分）答：1）當水泥中SO3含量, MgO含量, 初凝時間, 安定性這四項指標中有一項達不到要求,則此水泥為廢品。2)當水泥中:細度,終凝時間,強度,不溶物,燒失量,混合料摻量等六項指標中,有一項不滿足要求,此水泥判定為不合格。3)所有上述指標全部達到規范要求者,可判定為合格水泥..題庫00913、水泥砼配合比設計中的主要參數有哪些？各反映了什么關系？（6分）答：三個主要參數為w/c, SP, W.其中w/c反映了水與水泥之間的比例關系。SP反映了集料之間的比例關系.W反映了水泥漿與集料之間的比例關系題庫00912水泥砼的配合比設計由哪幾部分構成?各部分的主要任務是什么?答：1)計算“初步配合比”:根據原材料資料,按我國現行的配合比設計方法,計算初步配合比.2)提出“基準配合比”:根據初步配合比,采用實際施工材料進行試拌,測定拌和物的工作性,調整材料用量提出滿足工作性要求的基準配比.3)確定“試驗室配比”,確定既符合強度和工作性要求,又較經濟的試驗室配比.4)提出“施工配比”:根據工地現場材料實際含水率,換算為工地配比.題庫00912、簡述重交通與中、輕交通量道路石油瀝青技術要求的區別與聯系。答：區別:在技術指標中,除路用石油瀝青規定的有關指標外,其中重交通道路石油瀝青延度的溫度為15℃,蒸發損失試驗改為薄膜烘箱試驗.并引入含蠟量和密度兩項指標.聯系:都以針入度劃分標號:并對軟化點,溶解度及閃點等作了相應要求.題庫00911、水泥砼的試配強度f(wàn)cu , o與什么因素有關？如何確定它？答：○1.水泥砼設計要求的砼強度等級fcu,k；○2.施工單位質量管理水平；③強度保證率。題庫00910、熱拌熱鋪瀝青混合料的拌和時間是如何確定？ 答：當每一鍋出料后，目測認為不合適，則需重新進料，適當延長拌和時間。反復幾次，直至合格為止，此時的拌和時間再加上3-5s即為正式生產時的拌和時間，當?shù)谝诲伋隽虾螅m目測合格，須適當縮短時間重新試拌，反復幾次，直至不合格料出現為止。取不合格料出現前一次合格料的拌和時間再加3-5s即為正式生產時的拌和時間。
優質工程師考試問答知識庫
